COOLING & HEATING · BILLMELLOW GUIDE
Can a Smart Thermostat Lower Your Electric Bill?
BillMellow Editorial · Updated November 6, 2026
Understand smart thermostat savings, HVAC compatibility, heat pump settings and payback. Compare an ENERGY STAR average with your own heating and cooling costs.

The calculation
Estimated annual savings = eligible heating and cooling cost × an assumed savings percentage. Payback years = installed thermostat cost ÷ annual bill savings. Treat both as scenario calculations, not a guarantee.
ENERGY STAR reports average savings of approximately 8% of heating and cooling bills, or about $50 per year, for ENERGY STAR smart thermostats. If your annual eligible HVAC spend were $1,200, 8% would be $96; if it were $400, the same percentage is $32. Your climate, occupancy, equipment and behavior can produce a different result.
What a smart thermostat can and cannot change
A connected thermostat can schedule temperatures, respond to occupancy or allow remote adjustments. The electricity savings come from changing HVAC runtime, not from the internet connection itself. If your system already follows an effective schedule and the home is occupied most of the day, there may be less opportunity than in a home with long predictable absences.
The thermostat does not make an inefficient HVAC system efficient by itself, fix leaky ducts, add insulation or repair a malfunctioning heat pump. It can help people manage operation, but the home envelope, equipment sizing, maintenance, weather and comfort settings still drive energy demand.
Check compatibility before purchasing
Confirm the thermostat supports your heating stages, cooling stages, heat pump, auxiliary or emergency heat, humidifier/dehumidifier and wire configuration. A heat pump often needs equipment-specific control to avoid calling resistance backup heat unnecessarily. ENERGY STAR notes some variable-capacity systems perform best with the manufacturer-recommended thermostat, regardless of certification.
Look at the HVAC model manuals or ask a qualified technician before installing. Take a clear picture of the existing wiring and power off the equipment as directed. Do not guess at wire labels or bypass safety controls. If the system is under warranty or has communicating controls, an incompatible third-party thermostat may reduce features or cause improper operation.
Run a simple before-and-after review
Record baseline monthly kWh, gas use if relevant, heating and cooling days, thermostat settings and occupancy. After installation, compare periods with similar weather and billing length. Daily use or weather-normalized data can help, but whole-home use still includes other equipment. Keep notes about setpoint changes so the comparison reflects actual behavior.
A higher bill after installation does not automatically mean the thermostat caused it. Weather, a rate change, longer billing cycle, more occupants, auxiliary heat or a separate appliance could explain the difference. BillMellow can compare the statement totals and billing days; it does not retrieve HVAC telemetry or isolate one thermostat’s impact. Ask your utility about interval-data access if available.
A practical checklist
- Confirm HVAC and thermostat compatibility, especially heat pump and auxiliary heat.
- Estimate savings only from heating/cooling cost, not the complete bill by default.
- Check manufacturer settings, wiring and installation requirements before purchase.
- Compare similar-weather periods and note billing days, occupancy and setpoints.
- Include only verified rebates and use a low-savings payback scenario.
Frequently asked questions
Will a smart thermostat save 8% on my whole electric bill?
Not necessarily. ENERGY STAR’s average applies to heating and cooling bills, not every household’s total electricity use. Results vary by climate, occupancy, settings and system, and the average is not a guarantee for an individual home.
Can I install one on a heat pump?
Some models support heat pumps and auxiliary heat, but compatibility and setup matter. Follow the equipment manufacturer’s recommendations and consult a qualified installer if wiring or backup-heat controls are uncertain.
Does a smart thermostat reduce energy while I am away?
A schedule or occupancy feature can reduce HVAC runtime when it safely adjusts temperature during an absence. Actual savings depend on how long you are away, outdoor conditions, comfort recovery and system response.
Sources and limits
Linked sources provide the basis for this guide. Check them directly for current information, and contact the appropriate utility, agency, or manufacturer about your situation.
For more bill context, read how to read your electric bill or track monthly usage.