ELECTRICITY GUIDE
Is My Electricity Rate High? State Averages Compared
BillMellow Editorial · Published November 9, 2026

Compare your electric bill with dated EIA residential averages for all 50 states and DC. Calculate cents per kWh, check fees, and compare your bills monthly.
EIA data for August 2026, updated November 17, 2026
The U.S. residential average electricity price was 18.16 cents per kilowatt-hour (kWh) in August 2026, according to the U.S. Energy Information Administration (EIA). The national number alone cannot tell you whether you pay too much.
Start with your state's residential average, then check what your own price includes. An above-average result is a reason to inspect your bill—not proof of overcharging or a cheaper plan you can actually buy.
Residential electricity prices by state
These are historical monthly averages, not available offers or recommended rates. EIA may revise its estimates.
EIA data for August 2026, updated November 17, 2026 · EIA Electric Power Monthly, Table 5.6.A
| State or area | August 2026 | August 2025 |
|---|---|---|
| Alabama | 16.33 | 16.26 |
| Alaska | 29.41 | 27.79 |
| Arizona | 15.05 | 15.09 |
| Arkansas | 14.37 | 13.33 |
| California | 29.75 | 30.92 |
| Colorado | 17.17 | 16.21 |
| Connecticut | 24.51 | 30.17 |
| Delaware | 18.70 | 16.85 |
| District of Columbia | 25.98 | 23.18 |
| Florida | 14.99 | 15.33 |
| Georgia | 15.90 | 15.55 |
| Hawaii | 47.18 | 38.53 |
| Idaho | 13.37 | 12.08 |
| Illinois | 19.32 | 18.03 |
| Indiana | 17.02 | 16.21 |
| Iowa | 17.06 | 15.48 |
| Kansas | 15.47 | 14.65 |
| Kentucky | 13.80 | 13.10 |
| Louisiana | 12.87 | 12.55 |
| Maine | 32.11 | 28.14 |
| Maryland | 21.40 | 19.89 |
| Massachusetts | 30.48 | 30.55 |
| Michigan | 22.99 | 20.73 |
| Minnesota | 17.20 | 16.89 |
| Mississippi | 14.43 | 13.61 |
| Missouri | 16.02 | 15.32 |
| Montana | 15.57 | 14.29 |
| Nebraska | 13.54 | 12.80 |
| Nevada | 12.72 | 12.54 |
| New Hampshire | 27.64 | 24.44 |
| New Jersey | 24.61 | 24.70 |
| New Mexico | 16.51 | 15.98 |
| New York | 28.65 | 26.64 |
| North Carolina | 14.95 | 14.59 |
| North Dakota | 13.31 | 12.97 |
| Ohio | 19.38 | 17.55 |
| Oklahoma | 14.82 | 14.42 |
| Oregon | 15.92 | 15.85 |
| Pennsylvania | 21.77 | 19.93 |
| Rhode Island | 28.18 | 26.53 |
| South Carolina | 15.76 | 15.16 |
| South Dakota | 15.15 | 13.90 |
| Tennessee | 13.42 | 13.09 |
| Texas | 15.91 | 15.40 |
| Utah | 13.31 | 13.62 |
| Vermont | 23.84 | 22.10 |
| Virginia | 17.64 | 15.85 |
| Washington | 14.63 | 13.65 |
| West Virginia | 16.31 | 15.62 |
| Wisconsin | 19.41 | 18.44 |
| Wyoming | 14.43 | 14.33 |
| United States | 18.16 | 17.57 |
Source: U.S. Energy Information Administration, Electric Power Monthly, Table 5.6.A, released October 23, 2026. Only the Residential, August 2026 column is reproduced. The national figure is not a simple state average. The official Excel table is free to download without registration; both links may advance to a newer release.
What this benchmark measures—and what it does not
EIA calculates average retail revenue per kWh from reported electricity sales revenues and sales volumes. It is a sales-weighted measure, not an average of advertised plans or a survey of what one typical household pays. EIA explains this distinction in its monthly retail-price methodology.
Keep three different numbers separate:
- State residential average: historical revenue divided by electricity sold across the state's residential sector.
- Your all-in bill average: your current-period electricity charges divided by your billed kWh. This includes recurring fixed charges and applicable taxes and credits, so it is not an exact match to EIA's reporting basis.
- Your marginal rate: the charge for an additional kWh under your tariff. This can vary by time, tier, or credit threshold and usually excludes an unchanged flat monthly fee.
A supply-only advertised price is not directly comparable with a broad retail benchmark. Neither is a commercial or all-sector average: use the residential column for a household.
Calculate your own cents per kWh
Find current-period electricity charges and kWh covering the same service dates. If supply and delivery arrive on separate statements, include both once. Do not divide a payment containing an old balance, deposit, or late fee by this month's usage. Budget-billing payments may differ from actual charges; solar credits and net usage need special care.
All-in cents/kWh = current-period electricity charges in dollars ÷ billed kWh × 100.
For line-item help, see how to read your electric bill.
Illustrative example: 20¢ all-in is not a 20¢ appliance rate
Suppose a household uses 800 kWh over 30 days, with $128 in usage-based supply and delivery, a $20 fixed charge, and $12 in taxes. These are invented inputs, not a quote.
- Current-period total: $128 + $20 + $12 = $160.
- All-in average: $160 ÷ 800 × 100 = 20¢/kWh.
- Average variable charge: $128 ÷ 800 × 100 = 16¢/kWh, before the separately listed taxes.
- Daily use: 800 ÷ 30 = 26.7 kWh/day, rounded.
The all-in figure exceeds the August national benchmark by 1.84¢/kWh. That difference does not establish recoverable savings: location, season, fixed fees, tax treatment, and tariff structure differ.
For additional appliance use, consult the applicable variable charges rather than automatically using 20¢. Our space-heater cost guide shows how operating hours and the chosen rate change an estimate.
Make the comparison fair
Use a benchmark for the same month when possible. A statement spanning two calendar months does not align perfectly with EIA's monthly reporting. Record its service dates and treat the comparison as approximate; do not call August's figure the current November rate.
State averages also combine different utilities, tariffs, and usage patterns. A low-use household can have a high all-in average because its flat charge is spread over fewer kWh. Time-of-use patterns, minimum bills, discounts, and solar arrangements can widen the difference without a billing error.
Do not multiply the state average by your usage and label the result your “correct bill.” It does not reproduce your tariff or determine what your provider should charge.
Compare your own two bills next
Your household's history is often more actionable than a state comparison. Open BillMellow's two-bill comparison and enter the previous and current bills for the same home and account when possible.
1. Check each period's total, kWh, and billing days. Manual entry is available; text-based PDF extraction runs in your browser, but every suggested value needs review.
2. Compare kWh per day, not just total kWh, when billing periods differ.
3. Enter usage-based supply and delivery separately from fixed charges, taxes, and credits. Charge-by-charge explanations require both bills to reconcile to their entered totals.
A higher average variable charge may reflect tiers or peak-hour use, not necessarily a tariff increase. See BillMellow's methodology and limits. For a higher total, follow the high-electric-bill checklist. If supplier choice applies at your address, use current documents and your own usage to compare electricity plans, rather than treating the state average as an offer.
A five-minute monthly check-in
- Review the new statement's service dates, kWh, charges, and reading type.
- Compare it with the last checked bill; note daily use and any changed fees or credits.
- Note weather, occupancy, or heating changes without assuming causation.
- Optionally save the checked month in BillMellow's on-device timeline. Keep a backup before switching devices; avoid saving private bills on shared devices.
- Recheck EIA's data month when consulting the benchmark. This article is a dated snapshot, not an automatically updating rate feed.
Frequently asked questions
Is 20 cents per kWh expensive?
It is above the August 2026 U.S. residential average of 18.16¢, but below some state averages. First establish whether 20¢ means supply-only, all-in, or the marginal charge for extra use.
Does an above-average rate mean I should switch?
No. Confirm supplier choice, available terms, delivery charges, fees, and exit costs. A state average is neither an available plan nor evidence that switching saves money.
Why can my average rise when I use less electricity?
Fixed charges spread across fewer kWh can raise the all-in average even as the total bill falls. Credit thresholds or a different time-of-use mix can also change it.
Can I use the benchmark if my bill shows zero kWh?
Dividing by zero cannot produce a meaningful bill average. Review fixed charges, adjustments, and any solar or meter-reading explanation with your provider instead.
All electricity guides · Compare plan costs · Methods and limits · Editorial standards